Getting to the workshop
About 2.2 km in a straight line from the workshop on Avenue 8, Salmabad.
The workshop is about 2.2 km from Tubli in a straight line, to the south-west.
Shaikh Isa bin Salman Highway runs past Tubli Bay, and the Bahrain Map monument junction on it, rebuilt as a flyover and opened to traffic in 2009, is the landmark most Tubli drivers describe routes from.
The short way across is on the town roads heading south-west, picking up Quds Avenue and then Baghdad Avenue into the Salmabad blocks. Drivers already on the highway network can take Shaikh Salman Highway southbound to the Salmabad exits instead.
Hours are 07:00 to 22:00 Saturday through Thursday and 16:00 to 20:00 on Friday, and the map location is available on WhatsApp on +973 3822 4822.
Humid coastal air and vibration at highway speed
Tubli sits on the shore of Tubli Bay, a designated Ramsar Wetland of International Importance, with the islands of Nabih Saleh and Sitra across the water to the east. Living beside the water means living in humid, salt-laden air, and humidity is hard on steel: rim seats corrode, brake discs surface-rust when a car stands for a few days, adhesive balance weights lose their grip and battery terminals fur up. None of that is dramatic on its own, but a corroded rim seat is one of the commonest reasons a tyre loses air slowly with nothing at all wrong with the tyre.
Tubli also sits on the highway network rather than at the end of it. Shaikh Isa bin Salman Highway passes the bay and the Bahrain Map junction was rebuilt to carry free-flowing traffic through it, so cars based here spend real time at highway speed. That is exactly where imbalance declares itself: a vibration that arrives within a particular speed range and eases outside it, felt through the steering wheel if it is a front wheel and through the seat and floor if it is a rear one.
So the practical combination for a Tubli car is a balance check when a vibration appears at speed, and a proper look over the wheels, brakes and battery terminals for corrosion when they have not been inspected for a while.
Tyre prices by size
Check an indicative price range for your tyre size before you set off, then call or WhatsApp us for the latest prices and our best discounted rate with fitting. Find your size ↗
Questions, answered.
How far is Wagon Wheel from Tubli?
About 2.2 km in a straight line, with the workshop to the south-west of Tubli in Salmabad.
Which way do I come from Tubli?
The short way is across the town roads to the south-west, onto Quds Avenue and then Baghdad Avenue into Salmabad. If you are already on Shaikh Isa bin Salman Highway at the Bahrain Map junction, taking Shaikh Salman Highway southbound to the Salmabad exits is the alternative.
Could the humid air near the bay be why a tyre keeps losing air?
It can be part of it. Air escapes where the tyre seals against the rim, and corrosion or a build-up on the rim seat stops that seal working even when the tyre itself is sound. The valve is the other common culprit. Taking the tyre off the rim shows which it is, so the right thing gets fixed.
I get a vibration at speed on the highway but not around town. What is that?
Vibration that appears within a particular speed range and eases outside it usually points to wheel balance rather than alignment. It often starts after new tyres are fitted, after a balance weight falls off, or after a wheel or tyre is damaged. Alignment faults show up differently, as a pull on a level road or as uneven wear on one tread edge.